Mikey 16,781 Posted March 10, 2013 Share Posted March 10, 2013 At today's game, an Auburn batter hit a broken-bat one hopper back to the mound. This was somewhere around the second inning. I was at the game so I didn't didn't hear any commentary. Here's the question: I've never seen a broken aluminum bat before, and I've been around a lot of baseballs being hit by such bats. The bat that broke had the same painted markings on it as the bats other guys were hitting with. Anybody know the explanation? Link to comment Share on other sites More sharing options...
wareagle13 88 Posted March 10, 2013 Share Posted March 10, 2013 The only thing I could think is that when the ncaa required baseball to deaden the bats, it cost a little bit of structural integrity allowing weak spots to really become compromised. Link to comment Share on other sites More sharing options...
alhagan14 0 Posted March 10, 2013 Share Posted March 10, 2013 It happens time to time. I played for 15 years and I have seen probably 3-5 broken aluminum bats. Sometimes they just get warn down and hit in the wrong spot. Link to comment Share on other sites More sharing options...
WarEagle10 77 Posted March 10, 2013 Share Posted March 10, 2013 The only thing I could think is that when the ncaa required baseball to deaden the bats, it cost a little bit of structural integrity allowing weak spots to really become compromised. Actually, the thinner the metal,the more velocity the ball has coming off of the bat. I have seen bats crack when used in colder weather. I don't know the temp. up there today, but the guys have played in some serious cold weather here lately. That bat may have already had a slight crack and it finally gave way today. Link to comment Share on other sites More sharing options...
augolf1716 21,979 Posted March 11, 2013 Share Posted March 11, 2013 The only thing I could think is that when the ncaa required baseball to deaden the bats, it cost a little bit of structural integrity allowing weak spots to really become compromised. Actually, the thinner the metal,the more velocity the ball has coming off of the bat. I have seen bats crack when used in colder weather. I don't know the temp. up there today, but the guys have played in some serious cold weather here lately. That bat may have already had a slight crack and it finally gave way today. link???????????? Link to comment Share on other sites More sharing options...
WarEagle10 77 Posted March 11, 2013 Share Posted March 11, 2013 The only thing I could think is that when the ncaa required baseball to deaden the bats, it cost a little bit of structural integrity allowing weak spots to really become compromised. Actually, the thinner the metal,the more velocity the ball has coming off of the bat. I have seen bats crack when used in colder weather. I don't know the temp. up there today, but the guys have played in some serious cold weather here lately. That bat may have already had a slight crack and it finally gave way today. link???????????? Single-Wall Aluminum Bats Single-wall aluminum bats are the original type of non-wood softball bat. Because thinner sheets of aluminum alloy provide a better trampoline effect, the thinner the aluminum, the better the performance of the bat. Single wall bats are the most economical bat, but typically they are heavier and less effective. The only way to increase performance is to go with thinner sheets of metal, and that only works to the point where denting begins to occur. http://www.ehow.com/...-bat-types.html Ouch!!!! Link to comment Share on other sites More sharing options...
augolf1716 21,979 Posted March 11, 2013 Share Posted March 11, 2013 thanks finally something with substance Link to comment Share on other sites More sharing options...
Mikey 16,781 Posted March 11, 2013 Author Share Posted March 11, 2013 That bat today didn't just crack, it broke into two pieces, pretty much like a wooden bat might have done. The barrel end wound up about halfway to 3rd base while the handle end stayed with the batter. Temp in the low 70's at game time. All-in-all, it was a beautiful day for baseball. alhagan14, above, says he's seen a few of these in the past but it was sure a new one on me. Link to comment Share on other sites More sharing options...
aubaseball 2,861 Posted March 11, 2013 Share Posted March 11, 2013 Are u sure it wasn't a composite bat? Sounds a little like aluminum, but it is a wood composite. Link to comment Share on other sites More sharing options...
around4ever 4,139 Posted March 11, 2013 Share Posted March 11, 2013 It happens. I've seen it maybe a half dozen times in my many years of watching tens of thousands of at bats in baseball and fastpitch softball. Cold weather is definitely a factor. A defective bat could be a factor. A defective bat in cold weather doesn't stand a chance. I thought yall might be interested in this short video on how Aluminum bats are made. Link to comment Share on other sites More sharing options...
PowerOfDixieland 3,236 Posted March 12, 2013 Share Posted March 12, 2013 Pretty sure it was Blake Austin. Auburn baseball uses Louisville Slugger exclusively. Most likely was the "Attack" which is composite, but not quite wood. It's a two piece construction and the entire barrel end separated from the handle. http://www.slugger.com/baseball/aluminum/attack/attack-adult.html Link to comment Share on other sites More sharing options...
Mikey 16,781 Posted March 12, 2013 Author Share Posted March 12, 2013 I was assuming all AU hitters would be using some type of one-piece aluminum bat. If it was wood, composite or two-piece, mystery solved. Get away from inside the lines for just a short period of time and the technology leaves you behind! Link to comment Share on other sites More sharing options...
auburnphan 6,050 Posted March 12, 2013 Share Posted March 12, 2013 I have seen two break in my lifetime. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.